This post will show you How to install wsjt-x on linux mint in 6 steps. WSJT-X is a free and open-source program to support amateur radio communication protocols or “modes” such as FST4, FST4W, FT4, FT8, JT4, T9, JT65, Q65, MSK144, and WSPR. It also supports the Echo mode, which allows you to detect and measure your radio signals reflected from the Moon. Created these modes to enable confirmed, dependable QSOs even with extremely weak signals. Both Linux and Windows systems may readily accommodate the installation of this application. Here, we’ll examine how to install wsjt-x on computers running Linux Mint 21.
6 Simple Steps for Installing WSJT-X on Linux Mint 21
Step 1: Prerequisites:
- You ought to have a Linux Mint 21 Server running.
- To execute privileged tasks, you should be logged in as root or sudo.
- Your server should have the apt or apt-get program installed.
- Your server should also have the wget or curl software installed.
Step 2: Update Your Server
Before completing the steps to install wsjt-x on your server, ensure your installed packages are up to date with the most recent versions available from the default repo by using the sudo apt update && sudo apt upgrade commands as demonstrated below.
You May Also Read This: How to install Mastercam x9 windows 10 partition on mac
Step 3: Install WSJT-X
Although there are a few different ways to install WSJT-X on a Linux Mint system, we’ll concentrate on the two that work the best in this article.
Assuming default Repo
If you don’t need the most recent version, you can use the sudo apt install wsjtx command, as seen below, to install WSJT-X from the default repository. The package and its dependencies will be downloaded and established as a result.
You May Also Read This: Chip Chick Technology And Gadgets For Women 2023
Source code usage
The most recent version of WSJT-X can be installed using this technique. First, use the sudo apt install command to install all the necessary packages to create and compile the source code. Then, you must go to the official WSJT-X website and use any file transfer program like wget or curl to obtain the most recent source code version, as seen below.
Then, as demonstrated below, extract the package using the tar -zxvf wsjtx-2.5.4.tgz command. Using the cd wsjtx-2.5.4 command, change to the wsjtx-2.5.4 directory.
Build every file by running the command make with the options -DWSJT SKIP MANPAGES=ON and -DWSJT GENERATE DOCS=OFF, as shown below.
Then, use the sudo CMake —build. —target install command as displayed below to compile and install all the files.
Then, use the sudo CMake —build. —target install command as displayed below to compile and install all the files.
Step 4: Verify Installation
Using the dpkg -L wsjtx command, as demonstrated below, you can check the installed files after a successful installation.
Step 5: Launch WSJT-X
In the Linux Mint terminal, enter the wsjtx command as displayed below to launch. The application will launch as indicated below.
Step 6: Uninstall WSJT-X
When you’re finished using the wsjt-x application, you can delete it from your computer using the sudo apt remove wsjtx command, as demonstrated in the example below.
You may communicate effectively with many stations in the USA and Europe using WSJT-X. Information about your contacts is also displayed if you use the default settings. I’ll demonstrate how to install WSJT-X on Linux Mint in this article.
You must confirm that you have the appropriate group dial-out rights to install WSJT-X on Linux Mint. The majority of Linux distributions give hot-plug USB devices ttyUSB* device nodes. Therefore, the proper operation of WSJT-X depends on the group dialout.
WSJT-X 2.3
You must first comprehend WSJT-X to install it on Linux Mint. With the help of the WSJT-X program, you can send and receive data using your COM or USB-COM port. This program contains several helpful features, such as a reset button and an updater for FT-4 frequencies.
The Debian website has the most recent software version available for download. It includes both source and binary packages. The version and release stage is reflected in the names of each box. A version number ending in “patch” denotes a patch release, while “-rcN” denotes a release candidate. To avoid confusion, you should pay particular attention to the prefix because some programs use different punctuation.
JS8CALL
You’ve found the right site if you’ve been looking for a means to make ham calls on your Linux Mint desktop. JS8Call is open-source, free software that offers keyboard-to-keyboard transmission over weak signals using FT8-style code. It’s a special application that combines messaging, a network protocol layer to handle weak-signal communications and the resilience of FT8. Although JS8Call is not platform-specific, it functions on various widely used operating systems. As a result, many people, including amateur radio enthusiasts, have developed JS8Call.
When using JS8Call, it’s important to remember that the package includes some standard calling frequencies. But you can alter these frequencies by making changes to the js8call.conf file. Following that, you can keep using this program to call various numbers on Linux Mint.
Developing WSJT-X
You must build the most recent version of WSJT-X if you want to utilize it in your EME. The most current version, WSJT-10, is a significant upgrade over WSJT-X 1.7 and WSJT-9. The Ubuntu repositories contain this version. But remember that Python 2 is not supported by Ubuntu and was created in Python 3.
A software suite for testing wireless networks is called WSJT-X. For several OS platforms, there are many versions available. The build-essential meta-package must first be installed to build WSJT-X on Linux Mint. A RasPi-compatible installer is furthermore known for download from the WSJT-X website. The rig needs to be configured next. You must set up a backup UDP server for this. From the New QSO menu, you can perform this. You will then be able to use your N1MM logger’s remote mode. The decoded data is transferred into cqrlog by the secondary UDP server, but it has no impact on rig cat control.
CONFIGURING WSJT-X
A piece of software called WSJT-X is frequently used for testing wireless networks. The application is accessible on several operating systems, including Linux, Mac OS X, and Raspberry Pi. The official WSJT-X website has the most recent application version available for download. It also includes pre-built RasPi OS packages.
You can select a location for the.adi file you want to install using the WSJT-X setup program. By altering the INSTALL PREFIX environment option, you can choose a different location for the WSJT-X output folder. The secondary UDP server for your N1MM logger must then configure. From the New QSO menu, you can perform this. For your N1MM logger, you must additionally choose the remote mode option. The decoded data will move into the cqrlog file; however, this setting does not affect rig cat control.
You now have it. For all of you amateur radio fans out there, WSJT-X is a fantastic piece of software, and provided the right tools are available, installing it on Linux Mint is not too difficult. We hope that this guide has helped to dispel any confusion you may have had and that those of you who were having installation issues were able to find a solution here. If you’re still experiencing installing issues, feel free to comment below with any queries or problems, and we’ll try our best to answer.
